The influence of periodical, interference laser micromachining on nano-crystallization of amorphous magnetic ribbons

Authors

  • Roman Ostrowski Institute of Optoelectronics, Military University of Technology
  • Jan Kusiński AGH University of Science and Technology
  • Krzysztof Czyż Institute of Optoelectronics, Military University of Technology
  • Antoni Rycyk Institute of Optoelectronics, Military University of Technology
  • Antoni Sarzyński Institute of Optoelectronics, Military University of Technology
  • Wojciech Skrzeczanowski Institute of Optoelectronics, Military University of Technology
  • Marek Strzelec Institute of Optoelectronics, Military University of Technology
  • Olaf Czyż AGH University of Science and Technology

DOI:

https://doi.org/10.4302/plp.v9i3.762

Abstract

The main problem connected with crystallization of amorphous magnetic materials from the FeSiB(X) group is the increase of their fragility with the increasing content of crystalline phase. To overcome this defect the possibilities offered by the interference, pulse laser heating of FeSiB ribbons were utilized. A simple, interference prismatic system at the output of Nd:YAG laser (8-10 ns, 2 J, 1064 nm) was used. The investigations included the influence of laser radiation energy density, number of laser pulses and their periodical, spatial surface arrangement on the crystallization process.

Full Text: PDF

References
  1. Y.R. Zhang and R.V. Ramanujan, "A study of the crystallization behavior of an amorphous Fe77.5Si13.5B9 alloy", Mater. Sci. Eng. A 416, 161 (2006). CrossRef
  2. T. Alam, T. Borkar, S. Joshi, S. Katakamb, X. Chenc and N.B. Dahotre, "Influence of niobium on laser de-vitrification of Fe-Si-B based amorphous magnetic alloys", J. Non-Cryst. Solids 428, 75 (2015). CrossRef
  3. K.G. Pradeep, G. Herzer, P. Choi and D. Raabe, "Atom probe tomography study of ultrahigh nanocrystallization rates in FeSiNbBCu soft magnetic amorphous alloys on rapid annealing", Acta Mater. 68, 295 (2014). CrossRef
  4. S. Katakam, J.Y. Hwang, H. Vora, S.P. Harimkar, R. Banerjee and N.B. Dahotre, "Laser-induced thermal and spatial nanocrystallization of amorphous Fe-Si-B alloy", Scr. Mater. 66, 538 (2012). CrossRef
  5. J. Kusiński, A. Sypień, G. Kusiński and C. Nilson, "Microstructure and nanochemistry of Ca-doped cobalt oxide single crystals", Mat. Chem. Phys. 81, 390 (2003). CrossRef
  6. C. Smith, S. Katakam, S. Nag, X. Chen, R.V. Ramanujan, N.B. Dahotre and R. Banerjee, "Improved soft magnetic properties by laser de-vitrification of Fe-Si-B amorphous magnetic alloys", Mater. Lett. 122, 155 (2014). CrossRef
  7. Ch. Lu and R. H. Lipson, "Interference lithography: a powerful tool for fabricating periodic structures", Laser Photonics Rev. 4, 568 (2010). CrossRef
  8. K. Czyż, J. Marczak, R. Major, A. Mzyk, A. Rycyk, A. Sarzyński and M. Strzelec, "Selected laser methods for surface structuring of biocompatible diamond-like carbon layers", Diam. Relat. Mater. 67, 26 (2016). CrossRef
  9. A. Sarzyński, J. Marczak, M. Strzelec, A. Rycyk, K. Czyż and D. Chmielewska, "Laser micro-structuring of surfaces for applications in materials and biomedical science", Proc. SPIE, 10159, 101590A (2016). CrossRef

Downloads

Published

2017-09-30

How to Cite

[1]
R. Ostrowski, “The influence of periodical, interference laser micromachining on nano-crystallization of amorphous magnetic ribbons”, Photonics Lett. Pol., vol. 9, no. 3, pp. pp. 91–93, Sep. 2017.

Issue

Vol. 9 No. 3 (2017)

Section

Articles

License

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).